OMCL-AC160TS扫描探针 轻敲探针 可视化探针

中硬中硅探针(新概念芯片)

新的 OLYMPUS OMCL-AC 系列悬臂设计用于空气中的 AC 模式 AFM。

OMCL-AC 系列在悬臂的正端有一个四面体尖端。

 

 

新型四面体悬臂的突出特点

适用于各种样品表面:掺杂硅悬臂:

中档机械性能 [共振頻率:150kHz,弹簧常数:9 N/m(典型值)] 意味着 OMCL-AC200TS-R3 适合从软到硬的任何表面。
更硬的中间机械性能 [共振频率:300 kHz,弹簧常数:26 N/m] 意味着 OMCLAC160TS-R3 经过重新设计,可精确、轻柔地显示样品表面。

掺杂硅悬臂:

悬臂由硅制成,具有 0.1 - 0.4 Ω·cm 的低表面电阻。
这意味着我们传统悬臂的 1/20 阻力。

备受赞誉的“TipView”结构:

探头可以轻松定位在您感兴趣的确切位置。探头位于悬臂的确切末端,因此在光学观察过程中探头顶点不会被遮挡。

针尖位于探头最末端

探头是四面体的,针尖在最末端。 1微米或更大的探针顶点被进一步削尖。

新概念芯片:

切屑的理想平行侧壁使镊子易于使用并消除碎屑和碎屑问题。

 

  针尖

下面是 四面体针尖 的正面和侧面SEM 图像,最后一张是侧面的放大图。

      

尖端形状:锐化四面体(倾斜)
从正面看,它显示出良好的对称性,从侧面看是倾斜的。
考虑到这个几何特征,选择快速扫描(X)方向。

 

金属涂层

[反射涂层]

悬臂上涂有100nm厚的铝薄膜,用于反射AFM设备中偏转传感器的光线。可以预期高 S/N 感测的高反射。

 

 

 


 

Material
Probe apex Silicon (N type doped)
Lever Silicon (N type doped)
Coating Metal
Probe side Non
Reflex side Aluminum
chip
type New Concept Silicon Chip
Length × Width × Thickness
Lchip × Wchip × Tchip
[mm] 3.4×1.6×0.3
Measurement mode
Contact mode -
AC mode
Measurement environments
In air
In water -

 

*1 Positive value of 'Probe setback' means the probe apex extends even further than the apex of the cantilever. 
Negative value means that the probe apex locates over the cantilever.

*2 Effective probe length (Effective tip height) is defined as a length of distal part from the cantilever of two stage structured probe
to clarify the length of the actual probe which smoothly grow in diameter from the probe apex toward the bottom.

*3 Specifications are subject to change without any obligation on the part of the manufacturer.

 

 

 

 

说明 档案大小 下载
OMCL-AC160TS-R3探针规格 123KB
OMCL-AC160TS-C3探针规格 123KB
Olympus 原厂型录 123KB
型号 概述 询价数量