| Input Pressure Range |
0 to 100 p.s.i. |
| Output Pressure Range |
Regulated 0 to 100 p.s.i. (Maximum output is dependent upon input pressure) |
| Output Pulse Range |
Three factory-set ranges: (please specify when ordering)
- 1 to 100 milliseconds
- 0 to 1 second
- 0 to 10 seconds
Minimum duration is limited by the pneumatic solenoid valve to approximately 5ms |
| Output Pulse Accuracy |
0.4% of full scale (crystal controlled) |
| Output Pulse Repeatability |
0.4% of full scale (1% over the life of the valve) |
| Valve Life Expectancy |
100 million cycles |
| Output Pulse Setting |
Via a front panel 10-turn calibrated dial |
| Modes of Operation |
- Pulsed pressure via pushbutton, external TTL pulse or optional footswitch
- Continuous pressure
- Gated pressure via external TTL level input
|
| Pulsed Pressure Modes |
- Front panel pushbutton switch
- External TTL input signal
- Optional footswitch
|
| Output Pressure Gauge |
Front panel analog gauge 0 to 100 psi |
| Power Requirements |
120v AC, 60 Hz, 30 watt or 220v, 60 Hz
Please specify when ordering |
| Gas Input & Back Pressure Fitting |
1/8" barbed hose fittings |
| Gas Output Fitting |
1/16" barbed hose fitting |
| Recommended Gas |
Nitrogen or clean dry compressed air; an externally-mounted input gas filter is provided |
| Size |
Compact bench top unit measuring
4.8"H x 5"W x 6"D |
